• Hi-SPL handling is perfect for suspension over choirs and orchestras • Wide-range condenser element with low-mass diaphragm for superior performance • Self-contained electronics eliminate need for external power modules • Flat, smooth frequency response • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector Hi-SPL handling is perfect for suspension over choirs and orchestras
• Wide-range condenser element with low-mass diaphragm for superior performance • Self-contained electronics eliminate need for external power modules • Flat, smooth frequency response • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
PRO 45 Specifications
Element
Signal to Noise Ratio
Condenser
66 dB, 1 kHz at 1 Pa
Polar Pattern
Dynamic Range (Typical)
Cardioid
106 dB, 1 kHz at Max. SPL
Frequency Response
Phantom Power Requirements
70 - 16,000 Hz
9 - 52V, 2 mA typical
Open Circuit Sensitivity
Weight
-37 dB (14.1 mV) re 1V at 1 Pa
0.5 oz (15 g)
Impedance
Power Module
100 ohms
Integral
Maximum Input Sound Level
Output Connector
134 dB SPL, 1 kHz at 1% T.H.D.
XLRM-type on cable
Accessories Furnished:
AT8146 foam windscreen; AT8451 steel hanger
Details<1>Hi-SPL handling is perfect for suspension over choirs and orchestras <>Wide-range condenser element with low-mass diaphragm for superior performance <>Self-contained electronics eliminate need for external power modules <>Flat, smooth frequency response <>25' (7.6 m) cable permanently attached between microphone and XLRM-type connector <1>Hi-SPL handling is perfect for suspension over choirs and orchestras <>Wide-range condenser element with low-mass diaphragm for superior performance <>Self-contained electronics eliminate need for external power modules <>Flat, smooth frequency response <>25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
In Stock
