Out of Stock
The Furman MAX In-Wall SVIDEO Module inserts into any MIW-POWER unit to protect against surges on both signal and power lines; thus, eliminating potential grounding problems by creating an Isolated Ground Reference for the remote equipment. MORE»
| Price | $59.95 |
Out of Stock
MIW-XT extends noise free, safe power from Panamax / Furman Power Management components to remote panel displays, ceiling mounted video projectors and powered sub-woofers. Discreetly hides behind electronic equipment for a neat, clean, code compliant and professional installation. MORE»
| Price | $149.95 |
Out of Stock
The MINIPORT-15 Power Relay is a NRTL-C TUV listed, 15 amp, relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. It includes an internal 12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches. Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however. MORE»
| List | $145.00 |
| Price | $128.01 (Save: $16.99) |
Out of Stock
The MINIPORT-20 Power Relay is a NRTL-C TUV listed, 20 amp, relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. It includes an internal 12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches. Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however. MORE»
| List | $190.00 |
| Price | $167.74 (Save: $22.26) |
Out of Stock
The 20-amp MP-20Q provides a pair of remotely-activated, relay-controlled outlets, set up for mounting in any standard electrical quad box, either directly or with a "mud ring" attached. Due to the space limitations of a quad box, the MP-20Q has a smaller feature set than the MP-20. MORE»
| List | $120.00 |
| Price | $105.94 (Save: $14.06) |
Out of Stock
The 15 Amp P-1800 AR delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1800 AR accepts input voltages over a wide AC voltage range and transforms it to a constant output of 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance. MORE»
| List | $1,100.00 |
| Price | $971.14 (Save: $128.86) |
Out of Stock
Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies. MORE»
| List | $550.00 |
| Price | $485.57 (Save: $64.43) |
Out of Stock
Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies. MORE»
| List | $750.00 |
| Price | $662.14 (Save: $87.86) |
Out of Stock
The 20 amp P-2400 AR delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-2400 AR accepts input voltage between 97V-137V and transforms it to a constant output of 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance. With it's robust 20A capacity, the P-2400 AR is ideal for high-current equipment such as power amplifiers or powering A/V racks in large installations. MORE»
| List | $2,200.00 |
| Price | $1,942.29 (Save: $257.71) |
Out of Stock
Designed for the most critical, ultra-low noise installations, the P-2400 IT is a symmetrically balanced power conditioner, providing unparalleled AC noise reduction and 100% isolation from the power grid for the lowest noise floor possible. The P-2400 IT features over 80 dB of common-mode and over 50 dB of differential-mode noise reducti on for recording, mastering, and broadcast studios, or anywhere noise-free performance is critical. With 100% isolation from line, neutral, and ground, the P-2400 IT is also ideal for breaking AC ground loops without rewiring or hiring an electrician. The P-2400 IT features a specially wound and shielded toroidal balanced isolati on transformer specifi cally designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furman’s revolutionary Series Multi-Stage Protection (SMP) featuring our Extreme Voltage Shutdown (EVS) circuits, and our exclusive Linear Filtering Technology (LiFT) combine to ensure what our customers have grown to expect from Furman - uncompromised protecti on and purification. MORE»
| List | $3,000.00 |
| Price | $2,648.57 (Save: $351.43) |
Out of Stock
The Prestige Series P-3600 AR G is a 3RU power conditioner/True RMS voltage regulator that offers a one-of-a-kind power management solution for A/V professionals around the globe. The P-3600 AR G ensures stable 120V power delivery from any input voltage source between 100V to 127V or 208V to 240V. The unit provides connected 120V equipment with stable voltage, power protection, and AC line filtration, ideal for use with 120V A/V gear when travelling to countries with 100V, 220V, 230V, or 240V services. MORE»
| List | $5,000.00 |
| Price | $4,414.29 (Save: $585.71) |
Out of Stock
The PLUGLOCK-PFP circuit-breaker protected locking outlet strip provides enough wall wart spacing for five bulky transformers and can be safely mounted out of sight, in the rear of your rack. Secure clamping design "locks" your transformers and conventional plugs in place, ensuring you never get disconnected from your power source. Adjustable clamps accommodate transformers and plugs from 0.4" to 2.1" above outlet. The sturdy, all steel construction and heavy-duty 5 foot (14 AWG) three conductor cord provide ultimate durability and longevity. MORE»
| List | $60.00 |
| Price | $52.97 (Save: $7.03) |
Out of Stock
The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-8R II power conditioner / sequencer, featuring Furman™s revolutionary SMP technology. Furman™s Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together, these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor MORE»
| List | $360.00 |
| Price | $317.83 (Save: $42.17) |
Out of Stock
The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO II power conditioner / sequencer, featuring Furman's revolutionary SMP technology. Furman’s Series Multi-Stage Protection (SMP) circuit features our exclusive Linear Filtering Technology (LiFT) and Auto-Reset Extreme Voltage Shutdown (E.V.S.). Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor. MORE»
| List | $525.00 |
| Price | $463.50 (Save: $61.50) |
Out of Stock
The PS-REL AC Relay provides an alternate way of closing switch contacts. Instead of being operated manually like the RS-1, it is a relay that detects the presence of AC power and, in response, closes relay contacts that are wired to a terminal strip. It may be used with any of the Furman products mentioned in connection with the RS-1. MORE»
| List | $50.00 |
| Price | $44.14 (Save: $5.86) |
