Out of Stock
The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality. MORE»
| Price | $1,136.27 |
Out of Stock
The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality. MORE»
| Price | $1,348.81 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,136.27 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,126.46 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,201.67 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,224.56 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,332.46 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,347.17 |
Out of Stock
With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium. MORE»
| Price | $1,675.80 |
Out of Stock
CM Series power amps include multiple protection circuits, such as ACL Active Clip Limiting, which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; IGM Instantaneous Gain Modulation, which monitors load current to protect against overloading; AUTORAMP to prevent abrupt turn-on levels by gradually increasing gain when the amplifier is switched on; as well as short circuit, DC voltage, comprehensive thermal management, current in-rush turn on/off transient and sub/ultrasonic input. A switch allows selection of 0.775V sensitivity or x40 gain. A high pass filter is selectable per channel, and 100 Volt and 50 Volt operation is supported with our CM100V and CM50V accessories. MORE»
| Price | $1,304.67 |
Out of Stock
Crest Audio proudly introduces the new CM Series industrial power amplifiers, ideal for multi-channel applications in nightclubs, restaurants, hotels, retail stores and video conferencing systems. The eight-channel CM 2208 features an advanced amplification architecture that allows low impedance or 70 Volt operation at the same power levels without the switching. Each amplifier in the chassis will operate to rated power, regardless of impedance connected, from 4 ohms to 70 Volt line systems. The design centers around an ultra-high efficiency output circuit, lowering the line current required for a given output power by as much as 50%. All inputs and outputs are on Phoenix connectors with level controls in the rear. CM Series power amps include multiple protection circuits, such as ACL Active Clip Limiting, which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; IGM Instantaneous Gain Modulation, which monitors load current to protect against overloading; AUTORAMP to prevent abrupt turn-on levels by gradually increasing gain when the amplifier is switched on; as well as short circuit, DC voltage, comprehensive thermal management, current in-rush turn on/off transient and sub/ultrasonic input. A switch allows selection of 0.775V sensitivity or x40 gain. A high pass filter is selectable per channel, and 100 Volt and 50 Volt operation is supported with our CM100V and CM50V accessories. MORE»
| List | $2,000.00 |
| Price | $1,961.90 (Save: $38.10) |
Out of Stock
Gain Comparator Limiting. When a signal has waveform peaks that exceed the amp's power-supply rails, waveforms get chopped off, or "clipped". This undesireable distortion most often happens when the amp is turned up too high (too much gain). GCL senses clipping (or current limiting) and dynamically reduces the gain for a few milliseconds. You can drive the CPX amp to its maximum (and beyond) without hearing audible distortion. MORE»
| Price | $403.83 |
Out of Stock
The PA 150 is a rugged, medium-power amplifier with features that make it stand alone in the industry. It’s a rack-mountable unit which occupies only one rack space, and yet packs a 75 W RMS per channel punch into 4, 8, or 16 Ohms. It’s selectable; a feature seldom found on the typical solid state amp. In bridge mode, this unit delivers 150 W RMS into 8, 16, and 32 Ohms.You might ask why 32 Ohms; that’s the load impedance for a 150 Watt, 70 Volt distribution system.There’s no fan in this unit to make noise.Adequate cooling is provided by two massive heat sinks. Each channel is protected from excessive operating temperatures with a thermal/fault system that is automatic, and only activates under extreme conditions. The PA 150 has an exclusive SPS compression system that senses conditions which might overload the amplifier and activates compression circuitry when clipping is imminent.This technique utilizes every precious Watt available to power transformer with three different voltage taps.The rear panel three-position selector switch then gives this amp the impedance selection capability by changing the internal “rail” operating voltages.Toroidal power transformers offer very high efficient operation (cool), have very low magnetic fields (hum), and are relatively small in size (weight). MORE»
| Price | $618.00 |
Out of Stock
Designed with touring sound professionals in mind, the Crest Pro 200 Series power amplifiers faithfully produce high power with low distortion in an extremely lightweight economical package. Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down to a 2 ohm load. The Pro 200 Series offer the protection that ensures safe & trouble free shows night after night. MORE»
| List | $1,760.00 |
| Price | $1,438.73 (Save: $321.27) |
Out of Stock
The SP-20AB Stereo Power Amplifier is a unique and economical 20 watt per channel stereo amplifier provided the load is 8 ohms (not recommended to use less than 8 ohms in stereo mode). Its toroidal transformer delivers ultra-quiet performance, making it ideal for recording studio applications. The SP-20A may be operated in any of three modes as selected by a rear-panel switch: normal stereo, two channel mono, or single channel (bridged) mono. The latter mode allows a power output of 30 watts provided the load is 16 ohms (not recommended to use less than 16 ohms in bridged mode). The SP-20AB is housed in a compact, half rack chassis, allowing it to be mounted either alone or side by side with other SP-20AB's in a 19" rack. Mounting kits are available from Furman MORE»
| List | $349.00 |
| Price | $308.11 (Save: $40.89) |
